 |
|
General Note: SRMS units that have firmware build versions prior to 1137 should follow these instructions before upgrading the firmware.
To perform a web browser based firmware upgrade, first download the latest fimage from the firmware download area to your local pc computer. Connect to the SRMS board with your favorite web browser and click on the setup icon. When the setup page loads, click on the Firmware Upgrade icon to be taken to the screen below.
Decide which level of upgrade that goes with the firmware you downloaded and click on the appropriate browse button to locate the firmware image. When the firmware image is selected then click on the Upgrade button. After a time you should see similar output below.
When the firmware programming is complete, the SRMS board will reboot with the new firmware image. At this point you may configure the SRMS board, DNS settings, upload your data base, add scripts etc.